Erreur dans l'interface de combat [ résolu ]

Bonjour,

Dans mon projet dès que le personnage entre en combat, la surface de combat est anormal....

Screen:


Je veux faire en sorte que seulement le combat n'est visible.
J'ai beaucoup d'interfaces de combat aussi, comment faire pour qu'un de mes interfaces soit visible en combat comme fond?


Comme vous l'aurez remarqué, les monstres ne sont pas situés où ils doivent l'être... Il doivent être au niveau du héro à gauche, mais là ils sont en bas!
Comment régler cela?

En plus de cela, dès que mon personnage entre en combat, l'image de transition n'apparait pas!


Voilà, j'espère que vous pourrez m'aider!

Pour la position des monstres , va dans ta base de donnée , à l'endroit ou tu fabrique les groupes de monstre . Tu peut faire glisser les monstres à l'endroit que tu veut .


Pour le problème de fond , peut tu nous dire les scripts de combat que tu utilise ?

Merci d'avoir répondu!
Ok, j'ai compris pour la position des monstres. Pour les scripts de combats j'utilise ceux-là:

Code:

#==============================================================================
# ■ VX-RGSS2-6 Side-View Battle System [Formation] [Ver.1.0.0] by Claimh
#------------------------------------------------------------------------------
# English Translation By: Elemental Crisis [http://www.rpgcrisis.net]
#------------------------------------------------------------------------------
# Actor location [Formation]
# The same amount of damage will be given regardless of formation setup.
#==============================================================================

module Battle_Formation
  #------------------------------------------------------------------------------
  # [Formation Setup]
  # $game_system.battle_formation = Formation ID
  # It’s possible to change the formation (Even an event script is possible).
  FORM = {
  # Formation ID => [[Member 1 x、y], [Member2 x, y],
  # [Member 3 x, y], [Member 4 x, y]]
  0 => [[380,150], [400, 230], [460, 170], [480, 250]]
  }
  #------------------------------------------------------------------------------
end

#==============================================================================
# ■ Game_System
#==============================================================================
class Game_System
  attr_accessor :battle_formation # Formation ID
  #--------------------------------------------------------------------------
  # ● Object initialization
  #--------------------------------------------------------------------------
  alias init_game_system initialize
  def initialize
    init_game_system
    @battle_formation = 0 # Initial formation
  end
end

#==============================================================================
# ■ Game_Actor
#==============================================================================
class Game_Actor < Game_Battler
  #--------------------------------------------------------------------------
  # ● Are sprites used? [Redefinition]
  #--------------------------------------------------------------------------
  def use_sprite?
    return true
  end
  #--------------------------------------------------------------------------
  # ● Battle screen Acquiring X Coordinate
  #--------------------------------------------------------------------------
  def screen_x
    return Battle_Formation::FORM[$game_system.battle_formation][self.index][0]
  end
  #--------------------------------------------------------------------------
  # ● Battle screen Acquiring Y Coordinate
  #--------------------------------------------------------------------------
  def screen_y
    return Battle_Formation::FORM[$game_system.battle_formation][self.index][1]
  end
  #--------------------------------------------------------------------------
  # ● Battle screen Acquiring Z Coordinate
  #--------------------------------------------------------------------------
  def screen_z
    bitmap = Cache.character(self.character_name)
    # Height +Y Coordinates
    return screen_y + bitmap.height / 4
  end
end



#==============================================================================
# ■ Game_Enemy
#==============================================================================
class Game_Enemy < Game_Battler
  #--------------------------------------------------------------------------
  # ● Battle screen Acquiring Z Coordinate [Redefinition]
  #--------------------------------------------------------------------------
  def screen_z
    bitmap = Cache.battler(self.battler_name, self.battler_hue)
    # Height +Y Coordinates
    return screen_y + bitmap.height
  end
end


#==============================================================================
# ■ VX-RGSS2-6 Side-View Battle System [MotionCtrl] [Ver.1.0.0] by Claimh
#------------------------------------------------------------------------------
# English Translation By: Elemental Crisis [http://www.rpgcrisis.net]
#------------------------------------------------------------------------------
# This script carries out the movement controls of the actors.
#==============================================================================

#==============================================================================
# ■ Scene_Battle
#==============================================================================
class Scene_Battle < Scene_Base
  #--------------------------------------------------------------------------
  # ● Battle Start Process
  #--------------------------------------------------------------------------
  alias process_battle_start_sideview process_battle_start
  def process_battle_start
    for battler in $game_party.members + $game_troop.members
      battler.move_mode = SideView::M_MODE_WAIT
    end
    process_battle_start_sideview
  end
  #--------------------------------------------------------------------------
  # ● Victory Process
  #--------------------------------------------------------------------------
  alias process_victory_sideview process_victory
  def process_victory
    for actor in $game_party.members
      actor.move_mode = SideView::M_MODE_WIN
    end
    process_victory_sideview
  end
  #--------------------------------------------------------------------------
  # ● Wait Until Motion Control Is Finished
  #--------------------------------------------------------------------------
  def wait_for_motion
    while @active_battler.motion_stop
      update_basic
    end
  end
  #--------------------------------------------------------------------------
  # ● Execute Combat Operations: Attack [Redefinition]
  #--------------------------------------------------------------------------
  def execute_action_attack
    text = sprintf(Vocab::DoAttack, @active_battler.name)
    @message_window.add_instant_text(text)
    targets = @active_battler.action.make_targets
    #---Enemy attack sound reproduced.
    if @active_battler.is_a?(Game_Enemy)
      Sound.play_enemy_attack
      wait(15, true)
    end
    #--- Proximity (Going)
    SideView.set_target_point(@active_battler, targets[0])
    @active_battler.move_mode = SideView::M_MODE_ATK1
    @active_battler.motion_stop = true
    wait_for_motion
    #--- Attack
    wait(5)
    @active_battler.move_mode = SideView::M_MODE_ATK2
    #---
    display_attack_animation(targets)
    wait(20)
    for target in targets
      target.attack_effect(@active_battler)
      display_action_effects(target)
    end
    #--- Proximity (Return)
    @active_battler.move_mode = SideView::M_MODE_ATK3
    @active_battler.motion_stop = true
    wait_for_motion
    #---Wait
    for target in targets
      target.move_mode = SideView::M_MODE_WAIT
    end
    @active_battler.move_mode = SideView::M_MODE_WAIT
    #---
  end
  #--------------------------------------------------------------------------
  # ● Execute Combat Operations: Skill [Redefinition]
  #--------------------------------------------------------------------------
  def execute_action_skill
    skill = @active_battler.action.skill
    text = @active_battler.name + skill.message1
    @message_window.add_instant_text(text)
    unless skill.message2.empty?
      wait(10)
      @message_window.add_instant_text(skill.message2)
    end
    #--- Enemy attack sound reproduced.
    if @active_battler.is_a?(Game_Enemy)
      Sound.play_enemy_attack
      wait(15, true)
    end
    #--- Long distance attack
    @active_battler.move_mode = SideView::M_MODE_MAGI
    #---
    targets = @active_battler.action.make_targets
    display_animation(targets, skill.animation_id)
    @active_battler.mp -= @active_battler.calc_mp_cost(skill)
    $game_temp.common_event_id = skill.common_event_id
    for target in targets
      target.skill_effect(@active_battler, skill)
      display_action_effects(target, skill)
    end
    #---Wait
    for target in targets
      target.move_mode = SideView::M_MODE_WAIT
    end
    @active_battler.move_mode = SideView::M_MODE_WAIT
    #---
  end
  #--------------------------------------------------------------------------
  # ● Execute Combat Operations: Item [Redefinition]
  #--------------------------------------------------------------------------
  def execute_action_item
    item = @active_battler.action.item
    text = sprintf(Vocab::UseItem, @active_battler.name, item.name)
    @message_window.add_instant_text(text)
    #--- Enemy attack sound reproduced.
    if @active_battler.is_a?(Game_Enemy)
      Sound.play_enemy_attack
      wait(15, true)
    end
    #--- Long distance attack
    @active_battler.move_mode = SideView::M_MODE_MAGI
    #---
    targets = @active_battler.action.make_targets
    display_animation(targets, item.animation_id)
    $game_party.consume_item(item)
    $game_temp.common_event_id = item.common_event_id
    for target in targets
      target.item_effect(@active_battler, item)
      display_action_effects(target, item)
    end
    #---Wait
    for target in targets
      target.move_mode = SideView::M_MODE_WAIT
    end
    @active_battler.move_mode = SideView::M_MODE_WAIT
    #---
  end
  #--------------------------------------------------------------------------
  # ● Attack Animation Display [Redefinition]
  # Targets : Object's Arrangement
  #--------------------------------------------------------------------------
  # 【Changed part】
  # Enemy sound effect is changed so it can be used in each phase of operation.
  # However, it changes so that the attack animation of an enemy can be displayed.
  #--------------------------------------------------------------------------
  def display_attack_animation(targets)
    display_normal_animation(targets, @active_battler.atk_animation_id, false)
    display_normal_animation(targets, @active_battler.atk_animation_id2, true)
    wait_for_animation
  end
  #--------------------------------------------------------------------------
  # ● HP Damage display [Redefinition]
  # target : Candidate
  # obj : Skill or item
  #--------------------------------------------------------------------------
  def display_hp_damage(target, obj = nil)
    if target.hp_damage == 0 # No damage
      return if obj != nil and obj.damage_to_mp
      return if obj != nil and obj.base_damage == 0
      fmt = target.actor? ? Vocab::ActorNoDamage : Vocab::EnemyNoDamage
      text = sprintf(fmt, target.name)
    elsif target.absorbed # Absorption
      fmt = target.actor? ? Vocab::ActorDrain : Vocab::EnemyDrain
      text = sprintf(fmt, target.name, Vocab::hp, target.hp_damage)
    elsif target.hp_damage > 0 # Damage
      if target.actor?
        text = sprintf(Vocab::ActorDamage, target.name, target.hp_damage)
        Sound.play_actor_damage
        $game_troop.screen.start_shake(5, 5, 10)
        target.blink = true # Only adds here
      else
        text = sprintf(Vocab::EnemyDamage, target.name, target.hp_damage)
        Sound.play_enemy_damage
        target.blink = true
      end
    else # Recovery
      fmt = target.actor? ? Vocab::ActorRecovery : Vocab::EnemyRecovery
      text = sprintf(fmt, target.name, Vocab::hp, -target.hp_damage)
      Sound.play_recovery
    end
    @message_window.add_instant_text(text)
    wait(30)
  end
end

#==============================================================================
# ■ VX-RGSS2-6 Side-View Battle System[MotionExe] [Ver.1.0.0] by Claimh
#------------------------------------------------------------------------------
# English Translation By: Elemental Crisis [http://www.rpgcrisis.net]
#------------------------------------------------------------------------------
# This script executes movement controls of the actors.
#==============================================================================

module SideView
  #----------------------------------------------------------------------------
  #-----[Operation Setup]-----
  # Operation Speed
  MOTION_SPEED = 20
 
  #-----[Animation Setup]-----
  # Usual enemy attack animation setup.
  E_ANIME = {
  # EnemyID => [Usually atttack and additional attack animations.]
  1 => [1, 0]
  }
 
  #----------------------------------------------------------------------------
  #----------------------------------------------------------------------------
  # Motion Control Mode
  M_MODE_WAIT = 0 # Standby
  M_MODE_MAGI = 1 # Attack
  M_MODE_DAMG = 2 # Non-Damage Attack
  M_MODE_WIN = 3 # Victory
  M_MODE_ATK1 = 4 # Direct Attack (Approaching)
  M_MODE_ATK2 = 5 # Direct Attack (Attacking)
  M_MODE_ATK3 = 6 # Direct Attack (Returning)
 
  module_function
    #--------------------------------------------------------------------------
    # ● Movement-Zone Calculation
    #--------------------------------------------------------------------------
    def set_target_point(attacker, target)
      case target
      when Game_Actor
        bits = Cache.character(target.character_name)
        attacker.target_x = target.screen_x + (bits.width / 8)
        attacker.target_y = target.screen_y
      when Game_Enemy
        bits = Cache.battler(target.battler_name, target.battler_hue)
        attacker.target_x = target.screen_x + (bits.width / 2)
        attacker.target_y = target.screen_y
      end
    end
  end
 
  class Game_Battler
    attr_accessor :move_mode # Operation Mode
    # 0:Standby 1:Attack 2: Un-useless 3:Victory
    attr_accessor :motion_stop # Operation Stop Flag (Under Movement Flag)
    attr_accessor :target_x # Move Position(x)
    attr_accessor :target_y # Move Position(y)
    #--------------------------------------------------------------------------
    # ● Object Initialization
    #--------------------------------------------------------------------------
    alias initialize_sdva_corpse initialize
    def initialize
      initialize_sdva_corpse
      @move_mode = 0
      @motion_stop = false
      @target_x = 0
      @target_y = 0
    end
  end
 
  #==============================================================================
  # ■ Game_Enemy
  #==============================================================================
  class Game_Enemy < Game_Battler
    #--------------------------------------------------------------------------
    # ● Attack Animation ID Acquisition
    #--------------------------------------------------------------------------
    def atk_animation_id
      return 0 if SideView::E_ANIME[@enemy_id].nil?
      return SideView::E_ANIME[@enemy_id][0]
    end
    #--------------------------------------------------------------------------
    # ● Attack Animation ID Acquisition (2 Sword Style:2 Weapons )
    #--------------------------------------------------------------------------
    def atk_animation_id2
      return 0 if SideView::E_ANIME[@enemy_id].nil?
      return SideView::E_ANIME[@enemy_id][1]
    end
  end
 
 
 
  #==============================================================================
  # ■ Sprite_Battler
  #==============================================================================
  class Sprite_Battler < Sprite_Base
    #--------------------------------------------------------------------------
    # ● Object Initialization
    # viewport : View Port
    # battler : Battler (Game_Battler)
    #--------------------------------------------------------------------------
    alias initialize_sideview initialize
    def initialize(viewport, battler = nil)
      initialize_sideview(viewport, battler)
      init_direct_attack
    end
    #--------------------------------------------------------------------------
    # ● Set Proximity Value For Attack
    #--------------------------------------------------------------------------
    def init_direct_attack
      @direct_attack_cnt = 0
      @direct_attack_phase = 0
      @direct_move_cnt = 0
      @battler_x_plus = 0
      @battler_y_plus = 0
      @moving_mode = 0
      @pattern = 0
      @direction = 0
    end
    #--------------------------------------------------------------------------
    # ● Frame Renewal [Redefinition]
    #--------------------------------------------------------------------------
    def update
      super
      if @battler == nil
        self.bitmap = nil
      else
        @use_sprite = @battler.use_sprite?
        if @use_sprite
          self.x = @battler.screen_x + @battler_x_plus
          self.y = @battler.screen_y + @battler_y_plus
          self.z = @battler.screen_z
          update_battler_bitmap
        end
        setup_new_effect
        update_effect
      end
    end
    #--------------------------------------------------------------------------
    # ● Bitmap Transfer Source Renewal
    #--------------------------------------------------------------------------
    alias update_battler_bitmap_sideview update_battler_bitmap
    def update_battler_bitmap
      case @battler
      when Game_Actor
        if @battler.character_name != @battler_name or
          @battler.character_index != @battler_hue
          @battler_name = @battler.character_name
          @battler_hue = @battler.character_index
          draw_pre_character
          draw_character
          if (@battler.dead? or @battler.hidden) and !@battler.dead_delay
            self.opacity = 0
          end
        end
      when Game_Enemy
        if @battler.battler_name != @battler_name or
          @battler.battler_hue != @battler_hue
          @battler_name = @battler.battler_name
          @battler_hue = @battler.battler_hue
          draw_battler
          if (@battler.dead? or @battler.hidden) and !@battler.dead_delay
            self.opacity = 0
          end
        end
      end
      motion_control
    end
    #--------------------------------------------------------------------------
    # ● Battler Drawing
    #--------------------------------------------------------------------------
    def draw_battler
      self.bitmap = Cache.battler(@battler_name, @battler_hue)
      @width = bitmap.width
      @height = bitmap.height
      self.ox = @width / 2
      self.oy = @height
    end
    #--------------------------------------------------------------------------
    # ● Pre-Character Drawing [Common]
    #--------------------------------------------------------------------------
    def draw_pre_character
      self.bitmap = Cache.character(@battler_name)
      sign = @battler_name[/^[!$]./]
      if sign != nil and sign.include?('$')
        @width = bitmap.width / 3
        @height = bitmap.height / 4
      else
        @width = bitmap.width / 12
        @height = bitmap.height / 8
      end
      self.ox = @width / 2
      self.oy = @height
    end
    #--------------------------------------------------------------------------
    # ● Character Drawing [Common]
    #--------------------------------------------------------------------------
    def draw_character
      index = @battler_hue
      pattern = @pattern < 3 ? @pattern : 1
      sx = (index % 4 * 3 + pattern) * @width
      sy = (index / 4 * 4 + (@direction - 2) / 2) * @height
      self.src_rect.set(sx, sy, @width, @height)
    end
    #--------------------------------------------------------------------------
    # ● Motion Control
    #--------------------------------------------------------------------------
    def motion_control
      # Memory Operation Mode
      @moving_mode = @battler.move_mode
      # Battler Drawing
      case @battler
      when Game_Actor # Actor
        actor_motion_control
      when Game_Enemy # Enemy
        enemy_motion_control
      end
    end
    #--------------------------------------------------------------------------
    # ● Motion Control (Actor)
    #--------------------------------------------------------------------------
    def actor_motion_control
      # Operation Change
      case @moving_mode
      when SideView::M_MODE_WAIT # Standby
        init_direct_attack
        @battler_x_plus = 0
        @direction = 4
        @pattern = 1
      when SideView::M_MODE_MAGI # Attack
        @battler_x_plus = -10
        @direction = 4
        @pattern = 3
      when SideView::M_MODE_DAMG # Non-Damage Attack
        @battler_x_plus = 10
        @direction = 4
        @pattern = 3
      when SideView::M_MODE_WIN # Victory
        @direction = 2
        @pattern = 1
      when SideView::M_MODE_ATK1 # Direct Attack (Approaching)
        exe_moving_attack_start
      @end_pos_x = @battler_x_plus
    when SideView::M_MODE_ATK2 # Direct Attack (Attacking)
      @battler_x_plus = @end_pos_x - 10
    when SideView::M_MODE_ATK3 # Direct Attack (Returning)
      exe_moving_attack_end
    else
      p "error:Sprite_Battler>> @moving_mode"
    end
    draw_character
  end
  #--------------------------------------------------------------------------
  # ● Motion Control (Enemy)
  #--------------------------------------------------------------------------
  def enemy_motion_control
    # 動作チェンジ
    case @moving_mode
    when SideView::M_MODE_WAIT # Standby
      init_direct_attack
    when SideView::M_MODE_MAGI # Attack
      @battler_x_plus = 10
    when SideView::M_MODE_DAMG # Non-Damage Attack
      @battler_x_plus = -10
      @shake_flg = true
    when SideView::M_MODE_ATK1 # Direct Attack (Approaching)
      exe_moving_attack_start
    @end_pos_x = @battler_x_plus
  when SideView::M_MODE_ATK2 # Direct Attack (Attacking)
    @battler_x_plus = @end_pos_x + 10
  when SideView::M_MODE_ATK3 # Direct Attack (Returning)
    exe_moving_attack_end
  else
    p "error:Sprite_Battler>> @moving_mode", @moving_mode
  end
end
#--------------------------------------------------------------------------
# ● Proximity Attack Execution Method
#--------------------------------------------------------------------------
def exe_moving_attack_start
  return unless @battler.motion_stop
  case @direct_attack_phase
  when 0 # Start Operation Preparation
    diratk_start
  when 1 # Move Operation (Going)
    diratk_move
  when 2 # After-Movement Wait
    diratk_wait
  end
end
def exe_moving_attack_end
  case @direct_attack_phase
  when 0 # Attack Operation
    diratk_attack
  when 1 # Move Operation (Return)
    diratk_back
  when 2 # Operation End
    diratk_end
  end
end
#--------------------------------------------------------------------------
# ● Proximity Attack Execution [Start Operation Preparation]
#--------------------------------------------------------------------------
def diratk_start
  # Pose Change
  @pattern = 1
  # The number of frames needed is the distance between current position
  # and target position.
  pos_x = @battler.target_x - self.x
  pos_y = @battler.target_y - self.y
  # Caculation for ammount of frames needed.
  @direct_move_cnt = @direct_attack_cnt = (pos_x.abs / SideView::MOTION_SPEED).round
  # NEXT Phase
  @direct_attack_phase += 1
end
#--------------------------------------------------------------------------
# ● Proximity Attack Execution [Move Operation (Going)]
#--------------------------------------------------------------------------
def diratk_move
  case @battler
  when Game_Actor
    x_plus = @width
    y_plus = -@height / 4
  when Game_Enemy
    x_plus = -@width - 10
    y_plus = @height / 4
  end
  # The next movement location is figured out by the distance between
  # current position and target position.
  pos_x = @battler.target_x - self.x + x_plus
  pos_y = @battler.target_y - self.y + y_plus
  @battler_x_plus += pos_x / @direct_attack_cnt if @direct_attack_cnt != 0
  @battler_y_plus += pos_y / @direct_attack_cnt if @direct_attack_cnt != 0
  # End count
  @direct_attack_cnt -= 1
  # Last movement (Insurance: Last correction)
  if @direct_attack_cnt <= 0
    @battler_x_plus = @battler.target_x - @battler.screen_x + x_plus
    @battler_y_plus = @battler.target_y - @battler.screen_y + y_plus
    # NEXT Phase
    @direct_attack_cnt = 5
    @direct_attack_phase += 1
  end
end
#--------------------------------------------------------------------------
# ● Proximity Attack Execution [Attack Operation Return]
#--------------------------------------------------------------------------
def diratk_wait
  # End Count
  @direct_attack_cnt -= 1
  # Last Movement
  if @direct_attack_cnt <= 0
    # Pose Change
    @pattern = 3
    # END Phase
    @direct_attack_phase = 0
    @battler.motion_stop = false
  end
end
#--------------------------------------------------------------------------
# ● Proximity Attack Execution [Attack Operation Return]
#--------------------------------------------------------------------------
def diratk_attack
  # Pose Change
  @pattern = 1
  # End Wait Count
  @direct_attack_cnt = @direct_move_cnt
  # NEXT Phase
  @direct_attack_phase += 1
end
#--------------------------------------------------------------------------
# ● Proximity Attack Execution [Move Operation (Return)]
#--------------------------------------------------------------------------
def diratk_back
  # The next movement location is figured out by the distance between
  # current position and target position.
  pos_x = @battler.screen_x - self.x
  pos_y = @battler.screen_y - self.y
  @battler_x_plus += pos_x / @direct_attack_cnt if @direct_attack_cnt != 0
  @battler_y_plus += pos_y / @direct_attack_cnt if @direct_attack_cnt != 0
  # End Count
  @direct_attack_cnt -= 1
  # Last Movement
  if @direct_attack_cnt == 0
    @battler_x_plus = 0
    @battler_y_plus = 0
    # NEXT Phase
    @direct_attack_phase += 1
  end
end
#--------------------------------------------------------------------------
# ● Proximity attack execution [Operation End]
#--------------------------------------------------------------------------
def diratk_end
  init_direct_attack
  @battler.motion_stop = false
  # END Phase
  @direct_attack_phase = 0
end
end



Je l'ai eu dans ce lien: http://rpgcreative.net/rpgmakervx/scripts-134-combat-vue-sur-le-cote.html

(PS j'ai copié-collé sans changer aucune valeur)

Et encore merci pour ton aide!


EDIT:
Non finalement c'est bon. J'ai trouvé la cause de mon problème. En fait c'était parce que j'avais mis le script pour la barre HP et SP ( bien que je ne sais pas pourquoi c'est à cause de lui ). Bref en tout cas, dès que je l'enlève, il n'y a plus aucun problème.

résolu